Evinrude New

Category
Condition
Brand
Priced Between
Store Location
Sort By
Evinrude Etec Outboards

Evinrude Etec Outboards.
Direct Injection Outboards available at JV Marine World

JV Marine sells the entire range of Evinrude Etec Outboards. From small portables right through to the new release and ground breaking G2 range. JV Marine’s factory trained outboard engine technicians can install and pre deliver your brand new Etec engine for complete peace of mind. All fit ups are fully guaranteed and of the highest standard.

JV Marine World Offers:
* BEST PRICES ON EVINRUDE ETEC OUTBOARDS
* ALL WORK GUARANTEED
* FACTORY TRAINED TECHNICIANS
* 5 YEARS WARRANTY ON ALL ENGINES ABOVE 40HP

Here’s some things you might not have known about Evinrude Etec Outboards:
Got a Question? Need some Advice? We can help!

Here’s some things you might not have known about Evinrude Etec Outboards:

* All Etec Engines over 30hp comes standard with a stainless steel prop?
* All Etec Engines meet or exceed all government emission standards?
* All Etec Engines 40hp and above come with a 5 year warranty (in both salt and fresh water).
* All 115hp and above come standard with I-command (digital) gauges?
* Did you know Etec G2 Engines have in-built power steering?
* Did you know Etec G2 Engines have digital throttle and I-Trim?
* Did you know Etec G2 Engines allow you to colour match your panels to the colour of your boat?
* Did you know Etec G2 Engines are more fuel efficient than the latest 4-stroke outboards?
* Did you know that Etec G2 Engines offer more power and torque than the latest 4-stroke Engines?

Got a Question? Need some Advice? We can help!

If you have a question about any of the Evinrude Etec Outboard range don’t hesitate to ask. Our expert sales team are here to offer advice and point you in the right direction.

Email: info@jvmarine.com.au    Braeside: 03 9798 8883   Laverton: 03 9368 7100

EVINRUDE ETEC G2 OUTBOARDS ARE HERE!
The latest release in ‘Direct Injection’ Outboard technology is here! The Evinrude Etec Outboard offers serious power and performance and leads the way in outboard fuel economy! These outboards have so many amazing features – make sure you watch the video to see what these outboards are all about.

50HP EVINRUDE ETEC ON A QUINTREX 430 FISHABOUT
Affordable packages like this Quintrex Fishabout 430 with a Evinrude 50 E-Tec are often your first steps into boating. Steve Morgan and Mark Stav from Melbourne’s JV Marine World take one for a ride in Port Phillip Bay.

NEW 2019 RELEASE 3CYL G2 OUTBOARDS
Take a closer look at the new 2019 model G2 outboards. 115, 140 and 150hp models now available with the same groundbreaking technology offered by the amazing new G2 range.

What do the proposed Emission Standards mean?
Which Evinrude products meet the proposed Emission Laws?
How do Evinrude products meet and exceed proposed standards?

What do the proposed Emission Standards mean?

The Australia Government is working to reduce air pollution by introducing emission standards for non-road spark ignition engines & equipment including outboard engines for boats. The new Emission Standards will restrict supply and importation of new engines/equipment that don’t meet the proposed standards. The standards will be in line with the United States Environmental Protection Agency (US EPA) and equivalent international standards e.g. CARB, EU. Outboards that meet any of these governing bodies emission laws will be compliant in Australia.

Which Evinrude products meet the proposed Emission Laws?

All Evinrude Engines meet and exceed the proposed emission standards not only in Australia but around the world.

How do Evinrude products meet and exceed proposed standards?

All Evinrude ETEC engines utilise Direct Injection Technology which introduces the correct amount of fuel directly into the combustion chamber of the engine at precisely the right time. This provides the most efficient means of developing power, increasing fuel efficiency and reducing emissions more effectively than any other technology. Evinrude ETEC has been awarded a three star rating from the toughest emission standard in the world-The California Air Resources Board and was also the first outboard to receive the EPA’s Clean Air Technology Excellence Award. No other brand of outboards produces fewer reportable emissions than the Evinrude E-TEC family

Evinrude Etec 30DTSL
COMMON ELEMENTS OF 30HP RANGE:

COMMON ELEMENTS OF 30HP RANGE:

Limited Warranty:  5 Years
Engine type:  Inline 2-Cylinder E-TEC D.I.
Displacement:  35.2 cu in/ 577 cc
Recommended Fuel:  87 Octane
Emissions compliance: EPA 2013 CARB 3 STAR European Union
Recommended Oil:  Evinrude/ Johnson XD-100 Oil
Oil Tank capacity:  1.7 qt/ 1.6 L
Full Throttle RPM Range:  5500-6000 RPM
Alternator output:  56 Amps Total/ 15 Amps Net Dedicated
Fuel induction:  E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication:  Multi-Point Targeted Oiling
Bore x Stroke:  2.992 x 2.5 in / 76 x 64 mm

30DTSL - Tiller Steer Model
$6,999
  • Pre Delivery
  • Complete Factory Warranty
EVINRUDE ETEC 40DSL
COMMON ELEMENTS OF 40HP RANGE:

COMMON ELEMENTS OF 40HP RANGE:

Limited Warranty 5 Years
Engine type Inline 2-Cylinder E-TEC D.I.
Displacement 52.7 cu in/ 863 cc
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 3 STAR European Union
Recommended Oil Evinrude/ Johnson XD-100 Oil
Oil Tank capacity 2 qt/ 1.9 L
Full Throttle RPM Range 5500-6000 RPM
Alternator output 81 Amps Total/ 25 Amps Net Dedicated
Fuel induction E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.601 x 2.588 in / 91 x 66 mm

40DSL - Remote Steer Model
$8,168
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Gauges
  • Complete Factory Warranty
Evinrude Etec 50DSL
COMMON ELEMENTS OF 50HP RANGE:

COMMON ELEMENTS OF 50HP RANGE:

Limited Warranty:  5 Years
Engine type:  Inline 2-Cylinder E-TEC D.I.
Displacement:  35.2 cu in/ 577 cc
Recommended Fuel:  87 Octane
Emissions compliance: EPA 2013 CARB 3 STAR European Union
Recommended Oil:  Evinrude/ Johnson XD-100 Oil
Oil Tank capacity:  1.7 qt/ 1.6 L
Full Throttle RPM Range:  5500-6000 RPM
Alternator output:  56 Amps Total/ 15 Amps Net Dedicated
Fuel induction:  E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication:  Multi-Point Targeted Oiling
Bore x Stroke:  2.992 x 2.5 in / 76 x 64 mm

50DSL - Remote Steer Model
$8,699
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Gauges
  • Complete Factory Warranty
60DSL EVINRUDE ETEC
COMMON ELEMENTS OF 60HP RANGE:

COMMON ELEMENTS OF 60HP RANGE:

Limited Warranty 5 Years
Engine type Inline 2-Cylinder E-TEC D.I.
Displacement 52.7 cu in/ 863 cc
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 3 STAR European Union
Recommended Oil Evinrude/ Johnson XD-100 Oil
Oil Tank capacity 2 qt/ 1.9 L
Full Throttle RPM Range 5500-6000 RPM
Alternator output 81 Amps Total/ 25 Amps Net Dedicated
Fuel induction E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.601 x 2.588 in / 91 x 66 mm

60DSL - Remote Steer Model
$9,575
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Gauges
  • Complete Factory Warranty
75DSL EVINRUDE ETEC
COMMON ELEMENTS OF 75HP RANGE:

COMMON ELEMENTS OF 75HP RANGE:

Limited Warranty 5 Years
Engine type Inline 3-Cylinder E-TEC D.I.
Displacement 79.1 cu in/ 1295 cc/ 1.3 L
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 3 STAR European Union
Recommended Oil Evinrude/ Johnson XD-100 Oil
Oil Tank capacity 2.4 qt/ 2.3 L
Full Throttle RPM Range 5000-5500 RPM
Alternator output 81 Amps Total/ 25 Amps Net Dedicated
Fuel induction E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.601 x 2.588 in / 91 x 66 mm

75DSL - Remote Steer Model
$12,250
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Gauges
  • Complete Factory Warranty
EVINRUDE ETEC 90DSL
COMMON ELEMENTS OF 90HP RANGE:

COMMON ELEMENTS OF 90HP RANGE:

Limited Warranty 5 Years
Engine type Inline 3-Cylinder E-TEC D.I.
Displacement 79.1 cu in/ 1295 cc/ 1.3 L
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 3 STAR European Union
Recommended Oil Evinrude/ Johnson XD-100 Oil
Oil Tank capacity 2.4 qt/ 2.3 L
Full Throttle RPM Range 5000-5500 RPM
Alternator output 81 Amps Total/ 25 Amps Net Dedicated
Fuel induction E-TEC Direct Injection w/stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.601 x 2.588 in / 91 x 66 mm

90DSL - Remote Steer Model
$13,380
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Gauges
  • Complete Factory Warranty
Evinrude Etec 115G2 2019
COMMON ELEMENTS OF 115HP G2 RANGE:

COMMON ELEMENTS OF 115HP G2 RANGE:

Limited Warranty 5 Year
Engine type H.O. Inline 3-Cylinder E-TEC G2 D.I.
Displacement 114cu in / 1.9L
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 2 STAR European Union
Recommended Oil XPS Marine XD100
Oil Tank capacity 1.9 (7.2)
Full Throttle RPM Range 5000-6000 RPM
Alternator output Net Amps 14 idle / 22 wot
Fuel induction E-TEC Direct Injection with stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.85″ x 3.25″ (98mm x 82.6mm)
Mounting Centers Minimum 26 (660)
Integrated Features Dual Axis Rigging / iTrim
Controls ICON II

Evinrude 115HP G2 3Cyl DPS XLSEPT HO: MODEL: K115HGXF
$18,999
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • Digital Gauge
  • Complete Factory Warranty
Evinrude Etec 140ETEC G2
COMMON ELEMENTS OF 140HP G2 RANGE:

COMMON ELEMENTS OF 140HP G2 RANGE:

Limited Warranty 5-Year Engine** / 5-Year Corrosion
Engine type Inline 3-Cylinder E-TEC G2 D.I.
Displacement 114cu in / 1.9L
Recommended fuel 87 Octane
Emissions compliance EPA 2013 CARB 2 STAR European Union
Recommended Oil XPS Marine XD100
Oil Tank capacity 7.2L
Full Throttle RPM Range 5000-6000 RPM
Alternator output Net Amps 14 idle / 22 wot
Fuel induction E-TEC Direct Injection with stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.85″ x 3.25″ (98mm x 82.6mm)
Mounting Centers 660mm
Integrated Features Dual Axis Rigging / iTrim
Controls ICON II

140HP G2 3Cyl DPS XLSEPT - MODEL: K140GXF
$20,700
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • 4.3 Inch Digital Gauge
  • Complete Factory Warranty
150 evinrude etec G2 2019
COMMON ELEMENTS OF 150HP V6 G2 RANGE:

COMMON ELEMENTS OF 150HP V6 G2 RANGE:

Limited Warranty 5 Years
Engine type V6 66° E-TEC D.I.
Displacement 167 cu in / 2744 cc / 2.7L
Recommended fuel 87 Octane
Emissions compliance EPA 2013 / CARB 3 STAR / European Union
Recommended Oil Evinrude/ Johnson XD-100 Oil
Oil Tank capacity On-Engine 3 gal / 11.4 L / Accessory 1.8 gal / 6.8 L & 3 gal / 11.3 L & 10 gal / 37.85 L
Full Throttle RPM Range 5000-6000 RPM
Alternator output 133 Amps Total / 50 net Dedicated /14 amps @ idle
Fuel induction E-TEC Direct Injection with stratified low RPM combustion mode
Lubrication Multi-Point Targeted Oiling
Bore x Stroke 3.386 in x 3.100 in / 86 mm x 78.7 mm
Mounting Centers Minimum 26 in (660mm)
Integrated Features I-Trim
Controls Integrated Digital Shift & Throttle

Evinrude 150HP G2 V6 DPSXLSEPT HO MODEL: C150FXH
$22,260
  • Std Rig Kit Includes:
  • Control Box
  • Stainless Steel Prop
  • 4.3 Inch Digital Gauge
  • Complete Factory Warranty

Page [ ] - [0 Results]

New Search

Page [ ] - [0 Results]

New Search

Your Question or Enquiry

First Name

Middle Name

Last Name

Address

Suburb

State

Email

Phone

Menu